Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum meeting the requirements of ANSI/ICEA S-97-682.

Conductor Shield: Extruded semi-conducting thermosetting polymeric stress control layer.

Insulation: Extruded Ethylene Propylene Rubber (EPR) Class II and III as defined in ANSI/ICEA S-97-682.

Insulation Shield: Extruded semi-conducting thermosetting layer, clean and free stripping from insulation.

Copper Wire Shield: Helically applied annealed solid bare copper wires with a lapped non-metallic tape serving as a binder/separator.

Jacket: Black, non-conducting, sunlight-resistant (PVC) or LLDPE.

Triple-extruded for clean interfaces

Flexibility for easy handling

Excellent moisture resistance

Deformation-resistant

Sunlight-resistant

High dielectric strength

Low dielectric loss

Excellent resistance to water treeing

Clean-stripping insulation shield without the use of a release agent

Standard: ANSI/ ICEA S-97-682 and AEIC CS8

Medium Voltage Fill Shield Power Cables are intended for use in dry or wet locations for distribution of three-phase medium-voltage power. Because it's filled with shield, these medium voltage cables may be installed in ducts or direct buried.